Position: Model 6004MF multi-function Weight Transmitter is available from Instrotech Australia .
Model 6004MF is a unique multi-function Weight Transmitter. The operating mode is user-selectable for a variety of weighing, packing and materials handling applications. This weighing transmitter incorporates the latest 60MHz 32-bit ARM7 micro-controller to handle the different application programs and includes an SD card firmware boot-loader function.
Applications for Weight Transmitter:
* Load cell transmitter
* Belt weigher
* Loss-in-weight feeder
* Throughput weigher
* Bag filler
* Batch weigher
* Dynamometer
* Axle weigher
The alphanumeric keypad allows users to enter tag numbers, calibration date, technician's name, and a host of other options. Relays may be configured as on/off, annunciators, fault or pulse counting outputs, with hysteresis and time delays. The 4 function buttons may be configured to toggle displays or to change or accept alarms. This multi function Weight Transmitter incorporates PI control to allow the output to be used directly for load cell control or flow rate control.
A useful feature is the simulator, which allows belt speed, analogue output and relay control to be simulated during system commissioning. A 15-point lineariser, min/max display hold, preset tare and auto-zero maintenance are all user selectable and programmable. The many functions, digital inputs and optional methods of setup are fully explained in the comprehensive operating manual.
Features of Weighing Transmitter Indicators:
* Rugged and compact IP65 / NEMA 4 / UL Type 4 housing
* Fully programmable from the front keypad
* 10V, 5V and 3.3V load cell excitation with sense feedback
* 6-digit main display with user-selectable function
* 20mm clear high-bright red LED digits
* LCD backlit screen with
* 4 lines of user-selectable data 4 user-selectable short-cut function keys
* Isolated programmable analogue output as standard
* PI control and 15-point lineariser as standard
* Power supply for shaft encoders or sensors included as standard
* USB port included as standard
* 6 user-selectable digital inputs included as standard
* Real-time clock with date included as standard
* 1 solid-state and 5 change-over relays included
* SD card slot for firmware and datalogging
* RS232, RS485, USB or Ethernet interface options
* Optional GPS for vehicle applications
* 90-260V AC/DC or 10-30V DC auxiliary power supply
