Position: This page describes the Advanced Belt Weighing Conveyors manufactured by Adept Technology.The conveyor are generally slow speed conveyor installed with a single or two idler Belt Weigher.
Active Weighing Solutions Belt Conveyors are designed for continuous heavy duty environments either indoors or outdoors
The Conveyors will accurately weigh any bulk solid material the conveyor will carry and accurately control the flow rate for product blending or process control.
Application
Belt Weighing Conveyors are normally used for:
- In-Process Control,
- Batch Out Loading
- Output Blending
Weighing Belt Conveyor in action
Operation
Any product that can be conveyed on a conventional belt conveyor can be weighed. Belt Weighing Conveyors provide continuous weighing with better accuracy than a Belt Weigher.
The Belt Weighing Conveyor will provide:
- the total of the material passing
- Instantaneous flow rate
- An analogue output signal to control other equipment
- RS232, RS422/485 communications
- Pulse output
Features
- Weighing Accuracy 0.5% and better
- Feed rates from 50kg/hr to 500tph
- "C" Frame construction for fast belt changes
- Crowned and lagged head drum
- Wide range of lengths and belt widths. eg 300mm to 2500mm
- Open or fully enclosed design
- Cantilevered design option
- Constant belt tension mechanism
- Direct driven shaft mounted motor and gearbox
- Epoxy coated, mild steel or stainless steel construction options
Adjusts for large flow rate range
The Active Weighing Solutions Belt Weighing Conveyor will overcome accuracy problems caused by a large range in product flow rate. This is achieved through controlling the weight on the weigh deck.
Cantilevered, fully enclosed Belt Weighing Conveyor
Controller Features
- Graphics display
- Easy to use menu selection for settings
- Fully automatic belt zeroing
- Programmable limit outputs
- Flowrate retransmission
- Material totaliser
- Modbus communications (independent RS232 & RS485 ports)
- 24Vdc power supply
- Removable Chip memory to hold calibration
- Field weighing software upgrades
Open Belt Weighing Conveyor
Selection Criteria
Belt Weighing Conveyors provide the advantage of continuous operation and require only minimal headroom.
However, full dynamic material calibration is more costly than static calibration, although Belt Weighing Conveyors can be easily statically calibrated to yeild reasonable accuracy.
http://www.tes.net.au/
In addition, a quality weight controller is enable the Belt Conveyors work more safely and efficiently.
