Position: The Batch Weighing System is Featuring stainless steel contact surfaces and discharges material from bulk bags, de-lumps product, and feeds it gravimetrically into rigid bins. Bulk-bag-to-hopper interface consists of manual Spout-Lock clamp ring at top of pneumatically actuated Tele-Tube telescoping tube. Pneumatically actuated Power-Cincher flow control valve cinches bag spout concentrically, while Flow-Flexer bag activators raise and lower opposite bottom edges of bag, loosening compacted materials.
BETHLEHEM, PA - A new Batch Weighing System from Flexicon discharges material from bulk bags, de-lumps the product, and feeds it gravimetrically into rigid bins.
The unloader's bulk-bag-to-hopper interface consists of a manual Spout-Lock clamp ring at the top of a pneumatically-actuated Tele-Tube telescoping tube, allowing an operator to make a high-integrity, sealed connection between the clean side of the bag spout and the clean side of the hopper, and to automatically elongate the bag as it empties to promote flow and evacuation. Above the connection point is a Power-Cincher pneumatically-actuated flow control valve that cinches the bag spout concentrically, allowing retying of partially empty bags with no dusting. The unloader is also equipped with Flow-Flexer bag activators that raise and lower opposite bottom edges of the bag at timed intervals, loosening compacted materials and promoting material flow into the bag discharge spout.
The unloader's surge weigh hopper discharges into a low-profile de-lumping device with dual rotors and three-point heads that break-up agglomerates that have formed in the bag. On-size material is discharged into a gravimetric feeder that is connected via PLC to a scale on the plant floor, allowing accurate batch weights to be loaded into rigid totes placed on the scale.
All material contact surfaces of the unloader, de-lumping device and gravimetric feeder are of stainless steel finished to sanitary standards.
Other equipment manufactured by the company includes pneumatic conveying systems, flexible screw conveyors, bulk bag fillers, bulk bag conditioners, bag dump stations, lift-and-seal drum dumpers, Batch Weighing Systems and engineered plant-wide bulk handling systems with automated controls.
For information contact Flexicon Corporation, 2400 Emrick Blvd., Bethlehem, PA www.flexicon.com
18020-8006, 1-888-353-9426, sales@flexicon.com
