Continuous Weighing System from AMS

Ronan Continuous Weighing System, available through AMS , consists of a measuring frame, source holder, detector, cable and electronic weighing unit. The measuring frame is available in "A" and "O" frame configurations depending upon the physical characteristics of the conveyer. Both source holder and detector are integral parts of the measuring frame. An interconnect cable connects the detector to the remotely mounted electronic unit. This electronic unit can be located at a distance up to 1,650 metres from the detector.

Ronan Continuous Weighing System with weigh controllers

Electronic packages include panel mount, rack mount, surface mount, NEMA type 4 and NEMA type 4X enclosures. The highly focused radiation beam emitted from the source holder is transmitted through the bulk material on the conveyer. The ion chamber detector mounted below the conveyer receives radiation in an amount inversely proportional to the loading in weight-per-unit-length. This signal is then multiplied with a length-per-unit-time signal representing speed. Both signals are processed in the X96N weight computer and a signal representing rate of flow or weight-per-unit-time is calculated. This flow rate signal is integrated with respect to time to produce the total weight transported.

The electronic unit is capable of displaying weight, rate and speed simultaneously or continuous totalised weight in selected units. A predetermined count can also be set for batching controllers applications where an end-of-batch contact is desirable.----Ronan Continuous Weighing System now available from AMS

Measuring System For Use In Continuous Weighing System

ntecont plus from sjnl is a microprocessor-based measuring system . This weighing system is used in continuous weighing systems such as weighfeeders, belt weighers, weigh belts and solids flowmeters. Some of the technical features which are provided by this weighing system which include:performs the dual function of processing and displaying various parameters in a continuous weighing system such as speed, instantaneous load, feed rate, etc, and at the same time it sends feedback signal for controlling the same; following are some electrical features of this system which include: instantaneous load [on the belt or on the flowmeters as the case may be] is sensed by the load cell, and belt speed [wherever applicable] is fed to the processor [intercont plus], processed and final output is available as the flow rate. The totalised amount is obtained by integration of this value. A 16-bit computer is used by the intecont plus measuring system for better resolution;has high flexibility and convenient operation with ergonomically designed keyboard, and luminescent, antiglare, two-line dynamic weighing system display.